base reference station
Posted By DALE ADAMSON on 3/6/2008 at 4:47 PM

can the Promark3 base be used to send corrections to a computer or a LAN connection?


Re: base reference station
Posted By louis mullen on 3/6/2008 at 4:50 PM

Hi Dale

Yes through the IO module

Louis


Re: base reference station
Posted By DALE ADAMSON on 3/6/2008 at 4:58 PM

Then does this mean we could set up a base broadcasting NTRIP over the internet?


Re: base reference station
Posted By James Webb on 3/6/2008 at 5:56 PM

IN THEORY i WOULD SAY YES, BUT THE ntrip SOFTWARE, FOR MULTIPLE BASES SO YOU CAN HAVE A NEARBY VIRTUAL BASE, AIN'T CHEAP.

JIMBO

OOPS...FAFT FINGERED THE caps lock
Modified By James Webb on 3/6/2008 at 5:57 PM

Re: base reference station
Posted By DALE ADAMSON on 3/6/2008 at 9:57 PM

Trimble has a software for a single base its called GPSBase, it does broadcast RTCM 3.0, but it may not connect with a receiver other than Trimble, I talked to a representative today he is faxing me a quote "I think"

Dale

http://www.trimble.com/gpsbase_ds.asp

look at the datasheet.
Modified By DALE ADAMSON on 3/6/2008 at 10:04 PM

Re: base reference station
Posted By louis mullen on 3/7/2008 at 4:36 AM

Dale
Check your emails

Louis


Re: base reference station
Posted By louis mullen on 3/7/2008 at 4:44 AM

We use a small software called utilsea

It will take in corrections from up to two bases and allow you give direct IP to rovers via internet.
If your base is on a gprs or other dynamic IP address it will allow you mirror the info.
It works well.

A castor version is also available


Re: base reference station
Posted By DALE ADAMSON on 3/7/2008 at 6:57 AM

Thanks Louis

Dale


Re: base reference station
Posted By Ken Wanagas on 3/9/2008 at 8:36 AM

I would be interested in the
program(s) to run the base.
Ken


Re: base reference station
Posted By louis mullen on 3/9/2008 at 3:37 PM

Hi Ken

http://utilsea.free.fr/

Louis