MMO / WAAS / Diff Process Correction
Posted By David Miller on 9/8/2006 at 3:27 AM

After collecting data & then diff processing I get points which have been WAAS corrected rather than diff corrected. Is there any way I can process these subject points & turn off the WAAS correction? No mention found in user manuals.


Re: MMO / WAAS / Diff Process Correction
Posted By Mike Margolis_ on 9/8/2006 at 6:33 AM

1. Which receiver, MMPro or MMCE?
2. Did you store the raw data when you collected the job?


Just did it
Posted By Phil athome on 9/8/2006 at 7:28 AM

Sometimes sleep evades me so I was up tinkering with a MobileMapper Office project that I did last spring.

Before processing it shows that WAAS corrections are used. After processing it shows post processed for the correction.

I was just on my way to share the project through my ftp server when I saw your message.

Have you taken advantage of the application notes on the ftp server at

ftp://ftp.magellangps.com

Mobile Mapping --> MM Office --> Application Notes.



Re: MMO / WAAS / Diff Process Correction
Posted By Mark Silver on 9/8/2006 at 10:37 AM

Assuming you are using MobileMapper Office this short FAQ will show you "how-to":

http://www.alltopo.com/out/_mm_/ITRF00vsNAD83.pdf

Mark


Re: MMO / WAAS / Diff Process Correction
Posted By David Miller on 9/8/2006 at 9:20 PM

Omitted to mention - the receiver used is PM3