mobile mapper pro
Posted By randy dickerson on 8/20/2006 at 11:50 PM

recently purchased mobile mapper pro, it came with ver. 2.6 mobile mapper office, this set will not allow conversion to dxf., the drop down does not allow me to export to convert the data, what needs to be done
Modified By randy dickerson on 8/20/2006 at 11:52 PM

Re: mobile mapper pro
Posted By Paul T on 8/21/2006 at 7:02 AM

Simple - as always, you need to download the latest MobileMapper Office software from the Thales web site. Go to the web site, click on Products & Solutions, then on Support, then go down to Software list. Scroll down to MobileMapper Office and click on the link. Latest version is 3.30 but you may need to also update the firmware of the receiver - check the compatibility matrix on that page.


Re: mobile mapper pro
Posted By Shawn Billings on 8/21/2006 at 9:45 AM

Mobile Mapper Office is a huge download. Not too bad for high speed but if you're a dial up, you may want to opt for them sending you a CD...




Re: mobile mapper pro
Posted By randy dickerson on 8/21/2006 at 10:50 AM

The download for the MM Office is up and running however, we are unable to open or send the firmware over to our Mobile Mapper. Any suggestions?

Thanks for your help.


Re: mobile mapper pro
Posted By Linda Malcom on 8/21/2006 at 2:52 PM

Randy,

Send me an email with your phone number.

Linda
lmalcom@thalesnavigation.com


Re: mobile mapper pro
Posted By Peter Hartney on 8/24/2006 at 8:24 PM

Hello -have recently upgraded firmware v. 6.56 on MM Pro plus upgraded MM Office but post-processing now not working with ref. station RINEX data files (bar time lines not coming up on screen). PP appears to be still activated OK in unit.
Any ideas anyone?


Re: mobile mapper pro
Posted By Mike Margolis_ on 8/25/2006 at 8:23 AM

You probably didn't choose Post Processing when you started your project.


Re: mobile mapper pro
Posted By roger hoffman on 8/25/2006 at 12:26 PM

Mike (or anyone else out there)

Is there a way to disable the "Real-time" option from the Mobile Mapper Pro's Job Mode screen?
Because it comes up first on the screen (before "Post-processing") our field crews accidentally select that now and then when we would rather they never collect "Real-time" jobs.

Roger


Re: mobile mapper pro
Posted By Phil Stevenson on 8/25/2006 at 4:33 PM

There is not a way to remove real time as a choice.

Sometimes real time is the best choice.