Promark2&Trimble4700
Posted By JUAN TORO on 5/17/2005 at 3:49 AM

Hello list
It is possible work with two promark2 like rover and a Trimble4700 like base in postprocessing stop and go and postprocessing static.
Astech Solution process Trimble4700 files?
Trible Software process promark2 files?
Thanks


Re: Promark2&Trimble4700
Posted By John Francis on 5/17/2005 at 7:14 AM

I'm no sure what proprietary files A.S. works with, but it will allways work with a Rinexed file.

If you can Rinex the Trimble 4700 data, A.S. 7 THE pROmARK2'S CAN WORK WITH IT.


Re: Promark2&Trimble4700
Posted By Lawrence Paul Lopresti on 5/17/2005 at 10:44 AM

If you are going to OPUS the 4700 files, you will already have RINEX files to bring into Solutions. I do it with Leica files. If you want to process the 4700 files yourself do that in whichever software has L2 capabilities. Ashtech Solutions is fully L2 capable once you purchase a hardware lock.

Analyzing you rover files in Solutions should be painless, just match all your epochs with the 4700.

Detailed advice I cannot give you as I am a static man not a free rover.

Paul in PA


Re: Promark2&Trimble4700
Posted By Shawn Billings on 5/17/2005 at 10:51 AM

LPL

OPUS won't quite work in Espana.


Re: Good catch Shawn
Posted By Lawrence Paul Lopresti on 5/17/2005 at 11:07 AM

I worked very late last night. Juan was up before I went to bed. I have yet to finish my first cup of coffee.

Juan,

Use Trimble to find out where the 4700 is, then RINEX the base file to Solutions. Create the Trimble antenna file in Solutions, using the NGS ANTCAL offsets and go to town, or wherever else you care to rove.

Paul in PA


Re: Promark2&Trimble4700
Posted By Jim Frame on 5/19/2005 at 4:13 PM

OPUS won't quite work in Espana.

No, but AUSPOS will probably work fine.