Stop and Go software
Posted By Paul Henson on 8/13/2003 at 10:36 PM

I was told that the "stop & go" software for the PM2 was available on the internet. Could someone give me a website where this software can be downloaded?


Re: Stop and Go software
Posted By Mike Margolis_ on 8/13/2003 at 11:32 PM

Here is the firmware folder...

ftp://ftp.ashtech.com/firmware/ProMark2/

You'll need to make sure you have Solutions 2.6 and an initializer bar.

Contact your local Thales dealer for the software upgrade and the hardware as well.


Re: Stop and Go software
Posted By John Francis on 8/15/2003 at 2:21 PM

You don't NEED the initialzation bar.


Re: Stop and Go software
Posted By Dan Barry on 8/17/2003 at 7:38 AM

Mike: Does this mean that one could upgrade the promarks from static to kinematic by visiting the web site that you list? Dan Barry


Re: Stop and Go software
Posted By Mike Margolis_ on 8/17/2003 at 8:14 PM

Dan: yes
Modified By Mike Margolis_ on 8/17/2003 at 8:14 PM

Re: Stop and Go software
Posted By Dan Barry on 8/18/2003 at 10:33 AM

Mike: is there a written procedure to perform the upgrade? Dan