Connect to Port A or B on the ZMax with Ashtech Evaluate (or an alternative
communications program.) The default baud rate for the ZMax is 9600 baud.
Send $PASHQ,GETVER and wait 15 seconds.
Send $PASHQ,GETVER and wait 15 seconds.
Send $PASHQ,VERSION
$PASHQ,GETVER*60<CR><LF>
$PASHR,ACK*3D
$PASHQ,GETVER*60<CR><LF>
$PASHR,ACK*3D
$PASHQ,VERSION*2D<CR><LF>
$PASHR,VERSION
8241:
MD05
7210: V2.30
PBL: 0A01
FP: V5.9
COMM:
CV12
BATT: AV09
Radio: GSM,PDL
Radio ON: PDL
*58
The items that are important to me are highlighted bold in the listing above.
You can download instructions from [
instructions ]
The latest firmware is [
here ]
Data Collector Versions
Allegro CE: [
2.0.5 ]
Allegro CX, Allegro MX, MM6, MMCX, MMCE or PM3.RTK: [
2.3.5 ]
